- Enter in the Map menu and control that the checkbox “Show all the Waypoints” is flagged as active (the writing becomes red if active).

- Remember that your instrument can store many different waypoint files. Before using a waypoint file it must be activated: enter in the Waypoints menu and control to have the desired waypoint displayed (i.e. the waypoint file is activated). If not, press the button “Wayponts Menu” (upper left side of screen) and then press “Open File”. At this point just choose the desired Waypoint file to activate it (read the user’s manual to learn more on how to use waypoint files).

- follow this procedure: enter in waypoints menu > button “waypoints menu” > “delete all” > confirm “yes” (your waypoint will not be lost! But only stored as not active). Now press again “waypoints menu” and press “open file”. Select (touch) you waypoint file and press “open file”. That waypoint fill will be active. If you do not find the file, the problem is that the file is not existing in the memory of your instrument: upload it (see manual).

- the instrument cannot read your waypoint file format. The Instrument is normally able to read most formats but, if you want to be sure, you can save your waypoint file in “.wpt” format (you can find some applications in internet to transform a waypoint file into the .wpt format. If you do not find an application, just ask us or search it in this Compass website under the useful links section).